Product ID:SEAL-N-FINISH SPRAY TYPE CLEAR 2162
MSDS Date:07/05/1989
FSC:8030
NIIN:00N011837
MSDS Number: BQNVZ

KELLY-MOORE PAINT CO,INC

1015 COMMERCIAL ST
SAN CARLOS, CA 94070
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 415-592-8337

Preparer: JULIAN SCHAFER

Cage: 23865

KELLY-MOORE PAINT CO INC

SAN CARLOS, CA 94070 US

Telephone: 415-592-8337

Cage: 23865

PETROLEUM NAPHTHA.INCL NAPHTHENES,PARAFFINS,AROMATIC

Fraction By Weight: 55-70%

OSHA PEL N/K

ACGIH TLV: N/K

W/ POSS FLASHBACK TO HANDLING SITE.HAZ DECOMP

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

OR COMBUSTION AS IN WELDING/FIRE.

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED EXPOSURE TO HIGH VAPOR
CONCENTRATIONS MAY RESULT IN KIDNEY/LIVER DAMAGE.REPORTS HAVE
ASSOCIATED RPTD & PRLNG OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/
PERMANENT BRAIN AND NERVOUS SYSTEM DAMAG E.INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL
OR FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION.SKIN:IRRITATION.INGESTION/
INHALATION:NAUSEA,DIZZINESS,HEADACHE,CONFUSION,IRRITATION TO UPPER
RESPIRATORY TRACT,UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:SEE YOUR PHYSICIAN FOR SPECIFIC
MEDICAL OPINION REGARDING YOUR CONDITION.

First Aid:EYES:FLUSH WITH LARGE VOLUMES OF WATER FOR AT LEAST 15
MINUTES.GET MEDICAL ATTENTION.SKIN:WIPE OFF WITH A RAG.WASH
THOROUGHLY WITH SOAP AND WATER.INGESTION:DO NOT INDUCE VOMITING.IF
VOMITING OCCURS SP ONTANEOUSLY,KEEP HEAD BELOW HIPS TO PVNT
ASPIRATION OF LIQ INTO LUNGS.CONSULT HOSPITAL EMERGENCY ROOM/POIS
CTL CTR IMMED.INHALATION:REMOVE TO FRESH AIR.RESTORE
BREATHING.CONSULT PHYSICIAN.

Flash Point:21F,-6.11C
Lower Limits:1.0%
Extinguishing Media:USE APPROVED CLASS B FIRE EXTINGUISHER OR
EXTINGUISHING AGENTS SUCH AS CARBON DIOXIDE, FOAM, ETC.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
USE H2O SPRAY/FOG CAREFULLY. THIS PROD WILL FLOAT & IGNITE ON H2O
SURFACE. USE H2O TO COOL CLSD CONTR.
Unusual Fire/Explosion Hazard:KEEP CONTR TIGHTLY CLSD. ISOLATE FROM,
ELEC EQUIP, SPK,OPEN FLAME.CLSD CONTR MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. DO NOT APPLY TO HOT SURF.VAP MAY (SEE SUPP)

Spill Release Procedures:EXTINGUISH ALL SOURCES OF IGNIT.VENTILATE AREA
TO PVNT BUILDUP OF VAPORS WHICH MAY ACCUM IN LOW AREAS.FOR SMALL
SPILLS,SOAK UP LIQUID W/ ABSORB.FOR LARGER SPILLS,DIKE AREA WITH
ABSORBENT MATERIAL AND SCOOP UP LIQUID W/ NON-SPARKING TOOLS.
Neutralizing Agent:N/K

Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT AND FLAME.
Other Precautions:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
DISCARD CONTAMINATED SHOES.

Respiratory Protection:TO AVOID BREATHING VAPORS/SPRAY MIST,OPEN
WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR ENTRY DURING
APPLICATION & DRYING.WEAR RESPIRATORY PROTECTION (NIOSH/MSHA TC 23C
OR EQUIVALENT).USE PARTIC LE MASK TO AVOID BREATHING SANDING DUST.
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP TLV BELOW PRESCRIBED
LIMITS.
Protective Gloves:REC IF NEC TO PVNT EXTENDED EXPOSURE.
Eye Protection:GLASSES W/ SIDE SHIELDS/GOGG (SEE SUP)
Other Protective Equipment:N/K
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
REUSE.DISCARD CONTAMINATED SHOES.
Supplemental Safety and Health
MAY CONTAIN PIGMENTS (TITANIUM DIOXIDE, SILICATES,CALCIUM
CARBONATE/SILICON DIOXIDE) MAY BE NUISANCE DUST HAZ IN ORIGINAL DRY
PWDR FORM BUT ARE NOT HAZ IN WET PAINT.SPEC GRAV:0.72-0.96,
H2O=1.RTE OF E NTRY:SKIN/EYE CONT (MFR).EYE PROT:ARE REC TO PVNT
CONT.EXPLO HAZ:TRAVEL ALONG GROUND & IGNIT AT DIST LOCATION (SEE
ING

HCC:F3
Boiling Pt:B.P. Text:>200F,93.3C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:SEE SUPP
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:LIQUID
Percent Volatiles by Volume:65-75

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES,IGNITION SOURCES.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION/COMBUSTION AS IN WELDING OR FIRE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .INCINERATE IN APPROVED
FACILITY.DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.